openhab-ansible

Ansible playbooks to setup openhab on a raspberry pi. It'll install mosquitto and mqttwarn as well. Mqttwarn is configured to send data to graphite.

Prepare Raspberry Pi

Install raspian

Download it from https://www.raspberrypi.org/downloads/raspbian/

Unzip and copy it onto an sdcard

e.g on a mac with sdcard reader that would be:

sudo dd bs=1m if=2016-09-23-raspbian-jessie-lite.img of=/dev/rdiskXYZ

Insert sdcard into rasberry pi and boot.

Configure fixed ip address

Edit the file /etc/dhcpcd.conf and add the following lines (according to your network) and reboot.

interface eth0
static ip_address=192.168.1.5/24
static routers=192.168.1.1
static domain_name_servers=192.168.1.1

User setup

• Change password of user pi.
• Install ssh public key for user pi

Run ansible playbook

Edit group_vars/all/vault. Check/change other values in group_vars

ansible-playbook -i inventory raspi.yml